Prof. Dr. Martin Möller
Research of Martin Möller and his group is directed towards oligomer and polymer building blocks that can undergo self-assembly to complex nanostructures and functional systems. Emphasis is laid on water-soluble and water-born polymers. This involves the synthesis of ultra-small particles, as well as synthesis of uniform linear and branched macromolecules with functional and reactive side and end groups.
Curriculum Vitae
Martin Möller is a Senior Professor at RWTH Aachen University and an Associated Scientist of the DWI. From 2002 until 2019 he was professor for Textile Chemistry and Macromoleculary Chemistry at RWTH Aachen University, after being professor at the University of Twente (NL) and Ulm University. From 2003 till July 2019 he was scientific director of the DWI. He studied chemistry in Hamburg and Freiburg. He is a member of the “Akademie der Technischen Wissenschaften”/acatech and of the Nordrhein-Westfälische Akademie der Wissenschaften und Künste. In addition, he is active in a large variety of scienctific organizations. In 2002 he was decorated with the Körber Award for European Science and in 2014 he received the Herrmann-Staudinger Award of the ‘Gesellschaft Deutscher Chemiker’. He is a board member of the Max Planck School 'Matter to Life' and holds an ERC Advanced Grant for his project ‘Jellyclock’. His field of research is the synthesis of new polymers and self-assembly of polymer systems.
Projects
Publications
Titel/Autoren | DOI-LINK | Magazine | Jahre | |
---|---|---|---|---|
In Situ 3D-Printing using a Bio-ink of Protein–photosensitizer Conjugates for Single-cell Manipulation
A. Nishiguchi, G. Kapiti, J. R. Höhner, S. Singh and M. Möller
|
https://doi.org/10.1021/acsabm.0c00116 | A. Nishiguchi, G. Kapiti, J. R. Höhner, S. Singh and M. Möller | 2020 | |
In Situ Monitoring of Membrane Protein Insertion into Block Copolymer Vesicle Membranes and Their Spreading via Potential-Assisted Approach
T. Mirzaei Garakani, Z. Liu, U. Glebe, J. Gehrmann, J. Lazar, M. A. S. Mertens, M. Moller, N. Hamzelui, L. Zhu, U. Schnakenberg, A. Boker and U. Schwaneberg
|
https://www.doi.org/10.1021/acsami.9b09302 | ACS Appl Mater Interfaces | 2019 | |
Microgels Sopping Up Toxins-GM1a-Functionalized Microgels as Scavengers for Cholera Toxin
S. Boesveld, A. Jans, D. Rommel, M. Bartneck, M. Moller, L. Elling, C. Trautwein, P. Strnad and A. J. C. Kuehne
|
https://www.doi.org/10.1021/acsami.9b06413 | ACS Appl Mater Interfaces | 2019 | |
Long-Term and Clinically Relevant Full-Thickness Human Skin Equivalent for Psoriasis
S. Singh, Y. Marquardt, R. Rimal, A. Nishiguchi, S. Huth, M. Akashi, M. Möller and J. M. Baron
|
https://doi.org/10.1021/acsabm.0c00202 | ACS Applied Bio Materials | 2020 | |
4D Printing of a Light-Driven Soft Actuator with Programmed Printing Density
A. Nishiguchi, H. Zhang, S. Schweizerhof, M. Schulte, A. Mourran and M. Möller
|
https://doi.org/10.1021/acsami.0c02781 | ACS Applied Materials & Interfaces | 2020 | |
Amphiphilic Arborescent Copolymers and Microgels: From Unimolecular Micelles in a Selective Solvent to the Stable Monolayers of Variable Density and Nanostructure at a Liquid Interface
R. A. Gumerov, A. A. Rudov, W. Richtering, M. Moller and I. I. Potemkin
|
https://www.doi.org/10.1021/acsami.7b00772 | Acs Applied Materials & Interfaces | 2017 | |
Laser Carbonization of PAN-Nanofiber Mats with Enhanced Surface Area and Porosity
D. Go, P. Lott, J. Stollenwerk, H. Thomas, M. Moller and A. J. C. Kuehne
|
https://www.doi.org/10.1021/acsami.6b09358 | Acs Applied Materials & Interfaces | 2016 | |
Peptide-Functionalized Electrospun Meshes for the Physiological Cultivation of Pulmonary Alveolar Capillary Barrier Models in a 3D-Printed Micro-Bioreactor
P. Jain, S. B. Rauer, D. Felder, J. Linkhorst, M. Möller, M. Wessling and S. Singh
|
https://doi.org/10.1021/acsbiomaterials.3c00047 | ACS Biomaterials Science & Engineering | 2023 | |
Mixing of Two Immiscible Liquids within the Polymer Microgel Adsorbed at Their Interface
R. A. Gumerov, A. M. Rumyantsev, A. A. Rudov, A. Pich, W. Richtering, M. Moller and I. I. Potemkin
|
https://www.doi.org/10.1021/acsmacrolett.6b00149 | Acs Macro Letters | 2016 | |
Morphology-Controlled Kinetics of Solvent Uptake by Block Copolymer Films in Nonselective Solvent Vapors
A. Stenbock-Fermor, A. A. Rudov, R. A. Gumerov, L. A. Tsarkova, A. Böker, M. Möller and I. I. Potemkin
|
https://www.doi.org/10.1021/mz500347n | ACS Macro Letters | 2014 | |
Multilamellar Thermoresponsive Emulsions Stabilized with Biocompatible Semicrystalline Block Copolymers
A. Manova, J. Viktoroya, J. Kohler, S. Theiler, H. Keul, A. A. Piryazev, D. A. Ivanov, L. Tsarkova and M. Moller
|
https://www.doi.org/10.1021/acsmacrolett.5b00743 | Acs Macro Letters | 2016 | |
Direct Visualization of Vesicle Disassembly and Reassembly Using Photocleavable Dendrimers Elucidates Cargo Release Mechanisms
S. Li, B. Xia, B. Javed, W. D. Hasley, A. Melendez-Davila, M. Liu, M. Kerzner, S. Agarwal, Q. Xiao, P. Torre, J. G. Bermudez, K. Rahimi, N. Y. Kostina, M. Möller, C. Rodriguez-Emmenegger, M. L. Klein, V. Percec and M. C. Good
|
https://doi.org/10.1021/acsnano.0c02912 | ACS Nano | 2020 |