Prof. Dr. Martin Möller
Research of Martin Möller and his group is directed towards oligomer and polymer building blocks that can undergo self-assembly to complex nanostructures and functional systems. Emphasis is laid on water-soluble and water-born polymers. This involves the synthesis of ultra-small particles, as well as synthesis of uniform linear and branched macromolecules with functional and reactive side and end groups.
Curriculum Vitae
Martin Möller is a Senior Professor at RWTH Aachen University and an Associated Scientist of the DWI. From 2002 until 2019 he was professor for Textile Chemistry and Macromoleculary Chemistry at RWTH Aachen University, after being professor at the University of Twente (NL) and Ulm University. From 2003 till July 2019 he was scientific director of the DWI. He studied chemistry in Hamburg and Freiburg. He is a member of the “Akademie der Technischen Wissenschaften”/acatech and of the Nordrhein-Westfälische Akademie der Wissenschaften und Künste. In addition, he is active in a large variety of scienctific organizations. In 2002 he was decorated with the Körber Award for European Science and in 2014 he received the Herrmann-Staudinger Award of the ‘Gesellschaft Deutscher Chemiker’. He is a board member of the Max Planck School 'Matter to Life' and holds an ERC Advanced Grant for his project ‘Jellyclock’. His field of research is the synthesis of new polymers and self-assembly of polymer systems.
Projects
Publications
Titel/Autoren | DOI-LINK | Magazine | Jahre | |
---|---|---|---|---|
Liquid crystalline block copolymers as adaptive agents for compatibility between CdSe/ZnS quantum dots and low-molecular-weight liquid crystals
M. Bugakov, N. Boiko, P. Samokhvalov, X. M. Zhu, M. Moller and V. Shibaev
|
https://doi.org/10.1039/C9TC00610A | Journal of Materials Chemistry C | 2019 | |
Light-induced cross-linking and post-cross-linking modification of polyglycidol
F. Marquardt, M. Bruns, H. Keul, Y. Yagci and M. Moller
|
https://www.doi.org/10.1039/c7cc09498a | Chemical Communications | 2018 | |
Light-Controlled Radical Polymerization of Functional Methacrylates Prepared by Enzymatic Transacylation
S. Mommer, J. Kohler, H. Keul and M. Moller
|
https://www.doi.org/10.1002/macp.201500351 | Macromolecular Chemistry and Physics | 2016 | |
Laser Carbonization of PAN-Nanofiber Mats with Enhanced Surface Area and Porosity
D. Go, P. Lott, J. Stollenwerk, H. Thomas, M. Moller and A. J. C. Kuehne
|
https://www.doi.org/10.1021/acsami.6b09358 | Acs Applied Materials & Interfaces | 2016 | |
Large-scale, thick, self-assembled, nacre-mimetic brick-walls as fire barrier coatings on textiles
P. Das, H. Thomas, M. Moeller and A. Walther
|
https://www.doi.org/10.1038/srep39910 | Scientific Reports | 2017 | |
IR-Marked Sewing and Embroidery Yarns for Protection against Forgery
K. Schafer, R. Vinokur, A. Pich, M. Moller, V. Yavuz, P. Kreis, S. König, M. R. Buchmeiser, S. Schindler, H. J. Bauder and G. T. Gresser
|
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85147414779&partnerID=40&md5=3cbdaad3de6fb1cd932534f4848007d4 | Melliand International | 2022 | |
Investigation on the Flame Retardant Properties and Fracture Toughness of DOPO and Nano-SiO2 Modified Epoxy Novolac Resin and Evaluation of Its Combinational Effects
M. Haublein, K. Peter, G. Bakis, R. Makimieni, V. Altstadt and M. Moller
|
https://doi.org/10.3390/ma12091528 | Materials | 2019 | |
Influence of Polycation Composition on Electrochemical Film Formation
S. Schneider, C. Janssen, E. Klindtworth, O. Mergel, M. Moller and F. Plamper
|
https://www.doi.org/10.3390/polym10040429 | Polymers | 2018 | |
Inclusion of Phase-Change Materials in Submicron Silica Capsules Using a Surfactant-Free Emulsion Approach
Z. Chen, Y. L. Zhao, Y. Zhao, H. Thomas, X. M. Zhu and M. Moller
|
https://www.doi.org/10.1021/acs.langmuir.8b02435 | Langmuir | 2018 | |
In-Gel Direct Laser Writing for 3D-Designed Hydrogel Composites That Undergo Complex Self-Shaping
A. Nishiguchi, A. Mourran, H. Zhang and M. Möller
|
https://www.doi.org/10.1002/advs.201700038 | Advanced Science | 2018 | |
In Situ Monitoring of Membrane Protein Insertion into Block Copolymer Vesicle Membranes and Their Spreading via Potential-Assisted Approach
T. Mirzaei Garakani, Z. Liu, U. Glebe, J. Gehrmann, J. Lazar, M. A. S. Mertens, M. Moller, N. Hamzelui, L. Zhu, U. Schnakenberg, A. Boker and U. Schwaneberg
|
https://www.doi.org/10.1021/acsami.9b09302 | ACS Appl Mater Interfaces | 2019 | |
In Situ 3D-Printing using a Bio-ink of Protein–photosensitizer Conjugates for Single-cell Manipulation
A. Nishiguchi, G. Kapiti, J. R. Höhner, S. Singh and M. Möller
|
https://doi.org/10.1021/acsabm.0c00116 | A. Nishiguchi, G. Kapiti, J. R. Höhner, S. Singh and M. Möller | 2020 |