Latest Publications

Publication

Hpma-Based Nitroxide Radical Containing Nanoparticles with Controlled Radical Release: Detailed Physico-Chemical Characterization

D. Klepac, M. R. Tavares, M. Vragović, R. Ogrizović, S. Valić, S. Kereïche, S. K. Filippov, T. Etrych, D. Čakara and P. Chytil

European Polymer Journal Vol. 225 113727 (2025)

https://doi.org/10.1016/j.eurpolymj.2025.113727
Publication

Selenium-Modified Microgels as Interfacial Catalysts for the Heterophase Oxidation of Aromatic Aldehydes

A. Pavliuk, O. Fiukowski, J. Wagner, T. Kharandiuk, V. Ivasiv, R. Nebesnyi, U. Schnakenberg and A. Pich

Reaction Chemistry & Engineering (2025)

https://doi.org/10.1039/D4RE00516C

Publications

Titles/Authors	DOI-LINK	Journals	Years
3D MRI velocimetry of non-transparent 3D-printed staggered herringbone mixers M. Wiese, S. Benders, B. Blumich and M. Wessling	https://www.doi.org/10.1016/j.cej.2018.02.096	Chemical Engineering Journal	2018
3D nanofabrication inside rapid prototyped microfluidic channels showcased by wet-spinning of single micrometre fibres J. Lölsberg, J. Linkhorst, A. Cinar, A. Jans, A. J. C. Kühne and M. Wessling	https://www.doi.org/10.1039/c7lc01366c	Lab on a Chip	2018
3D-printed conductive static mixers enable all-vanadium redox flow battery using slurry electrodes K. Percin, A. Rommerskirchen, R. Sengpiel, Y. Gendel and M. Wessling	https://www.doi.org/10.1016/j.jpowsour.2018.01.061	Journal of Power Sources	2018
3D-printed rotating spinnerets create membranes with a twist T. Luelf, D. Rall, D. Wypysek, M. Wiese, T. Femmer, C. Bremer, J. U. Michaelis and M. Wessling	https://www.doi.org/10.1016/j.memsci.2018.03.026	Journal of Membrane Science	2018
Chemistry in a spinneret - Composite hollow fiber membranes in a single step process H. Roth, T. Luelf, A. Koppelmann, M. Abel and M. Wessling	https://www.doi.org/10.1016/j.memsci.2018.02.051	Journal of Membrane Science	2018
Closing the cycle: Phosphorus removal and recovery from diluted effluents using acid resistive membranes O. Nir, R. Sengpiel and M. Wessling	https://www.doi.org/10.1016/j.cej.2018.03.181	Chemical Engineering Journal	2018
Continuous hyperpolarization with parahydrogen in a membrane reactor S. Lehmkuhl, M. Wiese, L. Schubert, M. Held, M. Kuppers, M. Wessling and B. Blumich	https://www.doi.org/10.1016/j.jmr.2018.03.012	Journal of Magnetic Resonance	2018
Corrosion of metal electrodes in deep eutectic solvents D. Di Marino, M. Shalaby, S. Kriescher and M. Wessling	https://www.doi.org/10.1016/j.elecom.2018.04.011	Electrochemistry Communications	2018
Energy Recovery and Process Design in Continuous Flow Electrode Capacitive Deionization Processes A. Rommerskirchen, C. J. Linnartz, D. Muller, L. K. Willenberg and M. Wessling	https://www.doi.org/10.1021/acssuschemeng.8b02466	Acs Sustainable Chemistry & Engineering	2018
Feed flow patterns of combined Rayleigh-Benard convection and membrane permeation T. Lohaus, N. Herkenhoff, R. Shankar and M. Wessling	https://www.doi.org/10.1016/j.memsci.2017.11.061	Journal of Membrane Science	2018
Flow and filtration imaging of single use sterile membrane filters M. Wiese, C. Malkomes, B. Krause and M. Wessling	https://www.doi.org/10.1016/j.memsci.2018.02.002	Journal of Membrane Science	2018
Fouling mitigation in tubular membranes by 3D-printed turbulence promoters S. Armbruster, O. Cheong, J. Lolsberg, S. Popovic, S. Yuce and M. Wessling	https://www.doi.org/10.1016/j.memsci.2018.02.015	Journal of Membrane Science	2018
From Batch to Continuous Precipitation Polymerization of Thermoresponsive Microgels H. J. M. Wolff, M. Kather, H. Breisig, W. Richtering, A. Pich and M. Wessling	https://www.doi.org/10.1021/acsami.8b06920	Acs Applied Materials & Interfaces	2018
High capacity polyethylenimine impregnated microtubes made of carbon nanotubes for CO2 capture L. Keller, B. Ohs, J. Lenhart, L. Abduly, P. Blanke and M. Wessling	https://www.doi.org/10.1016/j.carbon.2017.10.023	Carbon	2018
High-Pressure CO2 Sorption in Polymers of Intrinsic Microporosity under Ultrathin Film Confinement W. Ogieglo, B. Ghanem, X. H. Ma, M. Wessling and I. Pinnau	https://www.doi.org/10.1021/acsami.8b01402	Acs Applied Materials & Interfaces	2018

Latest Publications

Hpma-Based Nitroxide Radical Containing Nanoparticles with Controlled Radical Release: Detailed Physico-Chemical Characterization

Selenium-Modified Microgels as Interfacial Catalysts for the Heterophase Oxidation of Aromatic Aldehydes

3D MRI velocimetry of non-transparent 3D-printed staggered herringbone mixers

3D nanofabrication inside rapid prototyped microfluidic channels showcased by wet-spinning of single micrometre fibres

3D-printed conductive static mixers enable all-vanadium redox flow battery using slurry electrodes

3D-printed rotating spinnerets create membranes with a twist

Chemistry in a spinneret - Composite hollow fiber membranes in a single step process

Closing the cycle: Phosphorus removal and recovery from diluted effluents using acid resistive membranes

Continuous hyperpolarization with parahydrogen in a membrane reactor

Corrosion of metal electrodes in deep eutectic solvents

Energy Recovery and Process Design in Continuous Flow Electrode Capacitive Deionization Processes

Feed flow patterns of combined Rayleigh-Benard convection and membrane permeation

Flow and filtration imaging of single use sterile membrane filters

Fouling mitigation in tubular membranes by 3D-printed turbulence promoters

From Batch to Continuous Precipitation Polymerization of Thermoresponsive Microgels

High capacity polyethylenimine impregnated microtubes made of carbon nanotubes for CO2 capture

High-Pressure CO2 Sorption in Polymers of Intrinsic Microporosity under Ultrathin Film Confinement